Industrial Sump Pumps

We design and manufacture the industrial sump pumps to handle various type of fluids from drainage water or any liquid waste containing non-fibrous solids to larger industrial processes.

This model is available in various types of materials and configurations for various types of industries. It can be configured for suspension plate or self supporting stand. These sump and condensate application pumps are available with high thrust bearing for temperatures over 200 degrees Fahrenheit. These pumps are available in 1.5 inches to 8 inches discharge sizes and flow rate upto 1600 GPM.

Features:

  • Adjustable impeller,
  • Leak proof,
  • Vapor tight construction,
  • Extensions for pit depths from 2 to 20 feet.

Applications:

  • Sump drainage,
  • Industrial process,
  • Elevator pits,
  • Basements,
  • Power plants,
  • Flood control,
  • Storm water,
  • Condensation control,
  • General dewatering service.

Specifications:

Pump A centrifugal type pump fitted with a semi-open impeller accurately machined and balanced for smooth, quiet operation.
Mechanical Shaft Seal Sump pumps are fitted with a mechanical shaft seal which prevents the liquid being pumped from entering the lower sleeve bearing while retaining the lubrication in the pump.
Pump Lubrication Lubrication system provides continuous lubrication to shaft, self lubricated intermediate and lower sleeve bearings. It eliminates the external grease lines.
Shaft Column Pipe Shaft column pipe is manufactured with schedule 80 hot dipped galvanized steel as per the standard.
Shaft Size 1 inch high accuracy, grade 1215 that is turned, ground and polished. Shafts are also available in stainless steel.
Discharge Pipe The discharge pipe is manufactured with schedule 40 hot dipped galvanized steel as per the standard.
Motor Support Bracket The heavy cast pedestal is accurately machined to house the thrust bearing and align the motor.
Thrust Bearing The thrust ball bearing is grease lubricated and elevated above the cover plate for protection from dirt and moisture.
Floor Plate Suspension Cover Heavy duty steel is used in floor plate and we will fabricate covers to duplicate existing pumps and piping.
Motors The motor and pump shafts are connected by a flexible coupling that allows the motor to be easily removed without distributing the pump and piping.
Strainer The strainer of the industrial sump pumps are made of heavy cast iron construction as per standard.
Float Control Heavy duty pedestal mounted float switch and stainless steel float ball is used as float control.
Basin Cover Heavy duty basin cover capable of supporting vertical suspended pumps and motors. Covers are available for simplex, duplex or other configurations.
Photo Gallery
Vertical Sump Pump
Vertical Sump Pump
Industrial Sump Pump
Industrial Sump Pump
2011-2014 SRS Pumps. All Rights Reserved.